Home EV charging is the fastest-growing electrical service we install, from Newport to Woonsocket. Here is what actually matters when you're planning an EV charger installation.
Level 1 vs Level 2
Level 1 uses a standard 120V outlet and adds roughly 4 miles of range per hour. Level 2 uses a 240V circuit and adds 25 to 40 miles per hour, fully charging most EVs overnight. Nearly every homeowner ends up wanting Level 2.
Hardwired vs NEMA 14-50 outlet
A hardwired charger is safer for continuous loads and required for chargers over 40 amps. A NEMA 14-50 outlet is flexible if you may take the charger with you. We install both.
Does your panel have room?
A 48 amp charger needs a 60 amp breaker. Many older 100 amp homes in Pawtucket and North Providence can't spare that. The options are a panel upgrade or a load-management device that pauses charging when the house is using a lot of power. We run the load calculation before you buy a charger.
Tesla Wall Connector installation
Tesla's Wall Connector and Universal Wall Connector are hardwired units we install regularly. The Universal version includes a J1772 adapter for other brands.
Permits and inspection
An EV charger circuit requires a permit in Rhode Island. We pull it and schedule the inspection so the install is documented for your insurer and future buyers.
Condos and driveways
Detached garages and driveway pedestals need trenching or overhead runs; condos need coordination with the association. We handle both across East Providence, Warwick and the rest of the state.
Ready to charge at home? Call (888) 633-7804 for a flat-rate quote.